Each member succeeded in bringing at least one idea to the meeting.
Our ideas:
- Teapot with temperature readout
- Inclement weather alarm clock
- Automated plant watering system
- Heating strips for snow melt
- Remote controlled powered air hose reel
- Automatic inventory counter
We picked the four best viable ideas, discussed their pros and cons, ultimately choosing the automatic inventory counter as our best product idea.
Tasks for proceeding with automatic inventory counter.
- Researching arguing code for counter - Steven
- Research who will buy - Christian
- Research demand for counter - Christian
- Start PowerPoint slides - Kelsey
- Brainstorm prototype ideas - Austin
Data/Evidence
The following are the detailed reports from each member on their task of coming up with ideas.
Kelsey Rayborn
My idea for the final design project is a teapot that would be able to tell you if your tea is too cold or too hot to drink. This teapot would do this with the help of an arduino temperature sensor and a crystal LCD screen that would display the temperature of your tea.As far as other product on the market that already do this, there isn't much in the way of actual teapots; however, many tea kettles do tell you the temperature of your water. The problem with this is that most people don't make their tea in their kettle, they pour the hot water in a teapot or mug. It would be extremely convenient for them to be able to tell the exact temperature of their tea so that they aren't disappointed with the wrong temperature of tea after they already went through all the trouble of making the tea in the first place.
Steven Elsbury
I started by asking people for suggestions to problems that they might need fixed and such but I got very few useful responses. Most did not fit the project description and were not feasible or too simple and boring. I took the few ideas that I liked and researched them a little bit to find out what was being done already. As far as the inclement weather alarm clock it seemed like something that would be much more viable to do with a smart phone app and in fact was done that way in a couple places online. My other ideas were an automated plant watering system and heating strips on wheelchair ramps (it is almost impossible to wheel a wheelchair up a ramp by yourself with any frost, snow or ice on it before hand). The plant watering was done very extensively so there's a demand but unfortunately there were so many products on the market that I felt it would be difficult to be original. The wheelchair ramp idea solved much more of a real problem and could be expanded to a lot more everyday customers to expand our target audience. I thought that it could be coupled with some tape or something to increase traction. When I asked about whether people were interested in it I got some enthusiastic responses but nothing spectacular. There are a lot of competing products most of which are designed to be embedded underneath the concrete itself so that they would have to be put in before it was poured which would be very difficult. My idea would be specifically for people remodeling without wanting to spend a whole lot of money and who only needed a very specific path to and from their cars or to the mailbox or something along those lines to be clear so that they could do so safely without having to worry about falling down or needing to take the time to shovel beforehand. It would be especially helpful for older or disabled people for whom shoveling would be a difficulty and the wait for someone else to come shovel gets in the way.
Austin Tanner
Remote controlled powered air hose reel
Problem
No inexpensive, convenient-to-use, remote controlled, powered air hose reels in construction industry.
Customer Segment
Commercial and Residential construction businesses; homeowners; welders;
Solution
Air powered hose reel that uses light (recommended "eel hose") air hose for increased distance as well as lighter reel. Wind-up and freewheeling will be controlled by tugs on the air hose (versus a physical remote control).
Other products that relate:
Air powered dual hose reel
http://www.stoneagetools.com/Manual_Inserts/SBT-LS_Manual_Insert.pdf
electric hose reel
http://www.coxreelsales.com/motor_driven_reels.html
sold at sears for nearly $800
http://www.sears.com/shc/s/p_10153_12605_00922785000P?sid=IDx01192011x000001&kispla=00922785000P&srccode=cii_17588969&cpncode=31-54468257-2
powered remote control hose reel
http://www.globalspec.com/FeaturedProducts/Detail/HannayReels/Hannay_Reels_RM_Remote_Control_Reel_Series/66013/0
Benchmarking
- Our product better because the windup can be controlled remotely without the need for a physical remote control (this also means that a person will not have to carry around a remote all day).
- Our product uses light hose for longer hose length on reel, and lighter reel weight.
- Our product would hopefully use an air-powered motor to eliminate the need for any additional hoses or cords (the air-powered motor will use the air plugged into the reel).
Christian O'Bryan
My idea was to make an inventory counter that uses weight sensors and push buttons to figure out how many items are left in stock and when you need to refill it depending on how fast certain items are used and then display them on an lcd screen. I thought of this idea when my dad was talking about the hospital vending machines. He said that the nurses are supposed to take an item out and then punch it into the computer but they never do. Our idea was to have the weight sensors and the push buttons do everything so that the nurses can just take the items and not worry about messing up the system. Another use of this would be at fast food restaurants because they have no way of telling when the soda machines are out other than costumers telling them. So this could be a weight sensor that goes in the machine and displays how much is left on a lcd screen. There are many other businesses that could benefit from this system.
No comments:
Post a Comment